Abhi’s Diamond Step Bore Tools

Abhi Fine Products has been the industry’s premier manufacturer of Honing Machines, Tools, Fixtures, and Tool Holders since 1996. The company’s Single Pass and Expansion Honing machines have been supplied to leading corporations, mid-corporate entities, and limited companies, as well as exported to Asian, European, and Gulf countries.

Abhi’s latest innovation ‘Diamond Step Bore Tools’ has been incorporated into its Single Pass Honing Machine AB 608. Its step bore tools can simultaneously process two concentric diameters, enhancing concentricity between bores. When used in conjunction with blind bore and step bore tools, superior geometry and surface finish can be achieved.

• The below case history proves the efficiency of the company’s Step Bore Tools:
• The required bore size was 15.30+0.011 mm, and the achieved size was 15.306 mm.
• The required bore size was 16.00+0.011 mm, and the achieved size was 16.004 mm.
• The honing length was 3 and 97 mm.
• There were a total of 6 spindles.
• The cycle time was 40 seconds.
• The required cylindricity was 0.005 mm, and the achieved cylindricity was 0.003 mm.
• The required total runout was 0.005 mm, and the achieved total runout was 0.003 mm.
• The required surface finish was 0.4 Ra, and the achieved surface finish was 0.3 Ra.
•  Abhi's tool is suitable for both soft and hardened material components.

Abhi Fine Products
www.abhifineproducts.com
Hall & Stall: A/109

---

---